B&C 18TBX100 2000 Watt Super Power Woofer
Details
- 2000 W continuous program power capacity
- 100 mm (4 in) copper voice coil
- 35 1000 Hz response
- 97 dB sensitivity
- Aluminium demodulating ring allows a very low distortion figure
- Double silicone spider w/optimized compliance
- Ventilated voice coil gap for reduced power compression
- Nominal Diameter 460 (18) mm (in)
- Nominal Impedance (1) 8 Ohm
- Minimum Impedence 6.2 Ohm
- Nominal Power Handling (2) 1000 W
- Continuous Power Handling (3) 2000 W
- Sensitivity (1W/1m) (4) 97 dB
- Frequency Range 35 - 1000 Hz
- Voice Coil Diameter 100 (4) mm (in)
- Winding Material Copper
- Former Material Glass Fibre
- Winding Depth 25 (1) mm (in)
- Magnetic Gap Depth 12 (1/2) mm (in)
- Flux Density 1.1 T
- Thiele & Small Parameters
- Fs 34 Hz
- Re 5.1 Ohm
- Qes 0.37
- Qms 7.2
- Qts 0.35
- Vas 212 (7.5) dm3 (ft3)
- Sd 1210 (187.6) cm2 (in2)
- Eta Zero 2.2 %
- Xmax +/- 9 mm
- Xvar +/- 11 mm
- Mms 209 g
- Bl 25.5 Txm
- Le 1.6 mH Mounting & Shipping Info
- Overall Diameter 460 mm (18 in)
- Bolt Circle Diameter 440 mm (17.3 in)
- Baffle Cutout Diameter 422 mm (16.6 in)
- Depth 209 mm (8.2 in)
- Flange & Gasket Thickness 16 mm (5/8 in)
- Net Weight 13 kg (28.6 lb)
- 2 hours test made w/continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance.
- Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
- Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
- Brand new & factory sealed
)
